Sign In | Join Free | My futurenowinc.com
China Yuan Qiao Alloy Wire Co., Ltd logo
Yuan Qiao Alloy Wire Co., Ltd
Excellent quality, create excellent future
Site Member

5 Years

Home > Thermal spray wire >

Kanthal SW 010/ Alcro wire/ thermal spray wire for arc spraying

Yuan Qiao Alloy Wire Co., Ltd

Kanthal SW 010/ Alcro wire/ thermal spray wire for arc spraying

Place of Origin : China

Brand Name : Yuanqiao

Model Number : 0066

MOQ : 15kg

Price : 10USD/kg

Packaging Details : 15kg/spool

Delivery Time : based on your quantity

Payment Terms : TT payment, western union

Supply Ability : 10 tons each month

Contact Now

Kanthal SW 010 is a ferritic iron-chromium-aluminum alloy (FeCrAl alloy) for use in arc and flame spray systems. The alloy produces dense, well bonding coatings, resistant to high-temperature oxidation and corrosion.

Typical applications for Kanthal SW 010 are bond coats in high-temperature coating systems, protective coatings in high-temperature atmospheres containing sulphur or carbon and protective coatings against scaling of conventional low alloy steels.

Chemical composition

C %Si %Mn %Cr %Al %Fe %
Nominal compositionBal.
Min---20.55.3
Max0.080.70.423.56.3

Machining

Depending of surface finish requirements, the coating may be machined by turning or grinding. For rougher surface, turning using carbide tools, light cuts and efficient cooling to avoid overheating is recommended. Grinding in fine steps using cooling, light pressure and clean wheels gives smoother finish.

Mechanical properties

Wire sizeYield strengthTensile strengthElongation
ØRp0.2RmA
mmMPaMPa%
1.68309305

Physical properties

Density g/cm37.10
Electrical resistivity at 20°C Ω mm2/m1.45
Melting point1500 °C
Magnetic PropertiesThe material is magnetic up to approximately 600 °C (the Curie point).
Dimension tolerance mm+ 0/-0.05

Young's Modulus
Temperature °C20
GPa220

Typical coating properties

Summary of results obtained when spraying with a conventional Arc Spray gun, using varying spraying parameters.

Deposition efficiency (%)62-78
Hardness HV (300g)165-280
Surface roughness (µm)11-16
Porosity (%)1-6*
Oxides (%)5-20*

*) These results are obtained when using air as spraying gas. Also nitrogen has been used, resulting in lower rates of porosity and oxides.

Safety

Personnel working with thermal spraying should be aware of the hazards connected to the process. They should be familiar with the use of equipment regarding, i.e. eye, skin, hearing and respiratory protection.



Wholesale Kanthal SW 010/ Alcro wire/ thermal spray wire for arc spraying from china suppliers

Kanthal SW 010/ Alcro wire/ thermal spray wire for arc spraying Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Yuan Qiao Alloy Wire Co., Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)